|
QUESTION:I have recently cleaned my furnace filter and Im not sure which direction it goes back in. I have a nordyne Filter which are the reusable filters. I cant figure out which side faces the furnace and which side doesnt.
ANSWER: Changing Filters
Filters should be replaced monthly, or if reusable filters are
installed, they should be cleaned monthly.
1. Unscrew the filter box access door fastener (see
Figure 1). Set aside for future use.
2. Remove access door.
3. Slide the right side filter out and then the left side filter.
Discard both filters.
4. Insert new filter on the left side first. Ensure the back
edge of the filter is underneath the back bracket. (See
Figure 1.)
5. After inserting left filter into box, rest the filter bottom
upon the support tab on the center rail. This will hold
the left filter in place while inserting the right filter.
6. Insert new filter on the right side next. Ensure the back
edge of the filter is underneath the back bracket. (See
Figure 1.)
7. Replace access door. The left side of the door should
hinge with left side of box, and then the right side
should be secured with fastener removed in step 1.Check this PDA from a secure site. This change does not look easy. The PDA (document) has a picture of your Nordyne in it as well. (If there are no arrows or other help, the side may not matter much.) For extra help check the Home Depot people. They can help you locally. My fingers are crossed!
|
|
|
|
